In popular culture, lasers are often portrayed as portable blasters that superheat whatever they hit. Some lasers do deliver tremendous amounts of energy in reality, but for scientists and engineers, lasers often need to do more than deliver just raw power. They need to deliver a very precise frequency—color—of light.
Precise lasers open many opportunities for experiments and technologies, notably atomic clocks, which offer the most precise timekeeping in the world. Atomic clocks are used in experiments, such as searches for dark matter, and they also make possible everyday technologies, like GPS. Currently, the most precise lasers, and therefore the most precise atomic clocks, are bulky and can be disrupted by small vibrations or changes in temperature, which limits their applications.
In an article published April 9, 2026, in the journal Physical Review Letters, JILA graduate student Jarrod Reilly proposed a new laser design that may allow for greater precision while making lasers more compact and robust. The design was developed along with JILA Fellows Murray Holland and John Cooper, as well as Simon Jäger—who was formerly a JILA postdoctoral researcher and is now an international collaborator at the University of Bonn in Germany. It builds on prior research they and their colleagues at JILA have performed, and their analysis indicated that it solves multiple problems that have limited past experiments. The improvements suggest a way that future atomic clocks can be both more precise and more convenient.
“Time and frequency are the two physical quantities that humans can measure the best,” Holland says. “This high sensitivity allows us to make measurements that are incredibly precise. Pushing it further opens up new domains where we could look farther than we've ever been able to look before.”
The new design is for a type of laser called a superradiant laser, and having a reliable superradiant laser is necessary to create a new type of compact atomic clock called an active atomic clock. Superradiant lasers that could enable active atomic clocks were first proposed by JILA researchers in 2009, and JILA researchers continue to refine the technology. Active atomic clocks use similar principles to standard atomic clocks but include some important tweaks.
Both traditional and active atomic clocks take advantage of the fact that atoms have quantum states which researchers can link together using light. Light comes in quantum packets that each carry a certain amount of energy that corresponds to its frequency—how quickly the light waves oscillate. An atom can be pushed from its initial state into a higher-energy state by hitting it with light of the right frequency. An atom with extra energy will sometimes release light to return to a lower-energy state. The consistent waves of light associated with a particular transition between chosen high- and low-energy atomic states can play a role similar to the steady swinging of a pendulum in a grandfather clock.
Traditional atomic clocks shine a laser on atoms and monitor when the atoms interact with the light at the correct frequency. An active atomic clock, instead, uses many atoms releasing light to create a laser with the desired frequency.
Making an active atomic clock requires getting all the atoms to work together to produce the superradiant laser. If too few atoms emit light at a time, nothing will be observed, and if different atoms simultaneously emit light in the wrong way, the resulting wave that is generated may lose coherence and become unusable.
To coordinate atoms, researchers put them in a special cavity where light bounces between two mirrors. The cavity maintains the frequency of light needed to interact with the atoms and encourages them to synchronize. The process resembles performers coordinating their dance steps by all listening to the same music.
In 2012, Holland collaborated with JILA Fellow James Thompson and demonstrated in experiments that superradiant lasers worked. But there was a hiccup: The process only worked for short periods at a time, and the laser ended up as a series of pulses, which couldn’t be used directly as an active atomic clock. The chamber coordinated the atoms releasing the desired frequency of light. However, when the atoms were put into the chosen energetic state, each atom emitted a small amount of extra light without any coordination. This unpredictable emission resulted in random motion that heated the atoms and eventually disrupted the synchronization needed for superradiance.
The new proposal suggests a method to eliminate the heating. Reilly, who is the first author of the paper, realized the atoms could be guided throughout the entire process and avoid the heating. Reilly observed that utilizing an additional state in the atom allows an experiment to use a different color of light to direct atoms through the troublesome step.
To make it work, he had to select an atom with two very similar states when the atom has as little energy as possible. Researchers can supply light to move the atoms between the two low-energy states. Then, placing the atoms in that additional low-energy state allows a second color of light to be introduced into a cavity that coordinates how the atoms move to the selected energetic state.
Now, the atoms are guided through more than the single dance step of producing the desired frequency. The experiment directs the atoms through a full loop of states, with a scientist controlling where all the energy goes. Each step is carefully managed, and the extra energy is predictably directed away from the atoms, where it can be easily handled.
The group used ideas from particle physics to develop a simulation of the quantum process that Reilly had identified. The simulation showed that the process should eliminate the heating that had previously prevented the creation of active atomic clocks using superradiant lasers.
“This heating rate should be so low that it would be easily manageable in a real apparatus,” Holland says.
But they went beyond eliminating the heating problem. They also discovered that the new design made the laser less sensitive to the shaking of the chamber than prior methods. The atoms didn’t just interact with the light in the cavity but with each other, like performers who can hear each other singing to the music. The new controlled transitions and extra light bouncing back and forth in the cavity should help the atoms interact and remain coordinated. If the cavity is slightly disrupted, it is like the music temporarily cutting out or being distorted, but the singing helps keep the performers coordinated nonetheless.
With increased coordination, the atoms should depend largely on synchronization with each other and less on the cavity, so shaking the cavity shouldn’t have much effect. The researchers used the simulation to show that there are certain ways to set up the experiment in which the frequency of the laser is not sensitive to vibrations of the cavity’s mirrors at all.
“What they're measuring in a clock is that frequency,” Reilly says. “The big-game-changer is that it becomes completely insensitive to vibrations, which people have spent 20 years trying to overcome. You could jump up and down next to the experiment, and in a regular clock, you'd see the color change, but you can jump up and down next to our clock and not see the color change. It should stay stable.”
The researchers also used their simulations to show that even when individual atoms fall out of sync with the others, it shouldn’t disrupt the superradiance—a known problem with some previous methods.
The team says they hope to see the proposal realized in an experiment, and they also want to combine their idea with another concept for the next generation of clocks: nuclear clocks. Nuclear clocks are similar to atomic clocks but use the quantum states of nuclei. The researchers believe their new superradiance technique could solve a lingering issue with nuclear clocks and provide a path to a new generation of unprecedentedly accurate timepieces.
Written by Bailey Bedford, Freelance Science Communicator